HOME   AMOUNT IN CART: $0.00 

SEARCHVIEW CART CHECK OUT 

CONTACT US  

KitchenBathRoomDrain CleanersToolsWater CoolersWater TreatmentPumps And WellsValvesPipe FittingsPlumbing SuppliesDrainageInstitutional ProductsCommercial ProductsPiping SystemsReturn PolicyPrivacy PolicySpecial OrdersCustomer ServiceWarrantyHelp

ADS, ACORN ENGINEERING, AK INDUSTRIES, ALSONS, AMERICAN BATH FACTORY, AMERICAN COPPER & BRASS, AMERICAN PLUMBER, AMERICAN STANDARD, AMERICAN VALVE, AMERICAN WATER HEATERS, AMERICAN WHIRLPOOL, AMETEK, AMTROL, ANCON,  AQUA GLASS, AQUA PURE, AQUARIUS, ARMSTRONG, ASHCROFT, B&B CHLORINATION, BASCO, BELL & GOSSETT, BEMIS, BENEKE, BLACK SWAN MANUFACTURING CO.,  BLUE WHITE, BOBRICK, BOOTZ, BRADFORD WHITE, BRADLEY, BRASS CRAFT, BRASSTECH, BRAXTON HARRIS, BRIDGIT, BRISTOLPIPE, BROAN, BURKS PUMPS, B-LINE,  CAMBRIDGE BRASS, CAMCO, CAMEO MARBLE, CAMPBELL WATER SYSTEMS, CANTEX, CARLON, CENTOCO, CENTRAL BRASS, CHARLOTTE, CHICAGO FAUCET, CHICAGO SPECIALTY, CHRONOMITE LABS, CHURCH, CLARK RELIANCE, COILHOSE, CONBRACO, CRANE, DELANY, DELTA  FAUCET COMPANY , DELTA SELECT, DEMPSTER, DIXON SALES, DORMONT, DORMONT COMMERCIAL, DURACRAFT PLASTICS, EAST JORDAN ST. CASTINGS, EASY HEAT, ECHO, EEMAX, ELJER, ELKHART, EMPIRE PIPE HANGERS, EVERPURE WATER TREATMENT, FIAT, FIELD TILE, FISHER MANUFACTURING COMPANY, FLINT & WALLING, FLOMATIC, FLO-CONTROL, FORD, FOREMOST, FRANKLIN BRASS, FREEDOM PLASTICS, GAMCO, GENERAL WIRE, GEORGE FISHER, GERBER PLUMBING FIXTURES, GOULDS PUMPS, GRINNELL, GRUNDFOS, GUARDIAN, HALSEY TAYLOR, HANCOR, HARVARD, HATCO, HEAD, HEADLAND, HOFFMAN, HONEYWELL, HONEYWELL –BRAUKMANN, HYDROCOWL, HYDROMATIC, IDEAL, IDEAL INDUSTRIES, INTERSAN, IPS, IN SINK ERATOR, JACKEL, JACUZZI, JET STREAM, JOHN WOOD, JOMAR, JONES PLUMBING SYSTEMS, JONES STEPHENS, J-M PIPE, JR SMITH, J.W. HARRIS, KEENEY-DURACRAFT, KISSLER, KLEIN TOOLS, KOBOLD, KOHLER,  KUNKLE, LAB SAFETY, LACROSS, LASCO PVC PIPE FITTINGS, LAVELLE, LEGEND VALVE, LENOX, LITTLE GIANT PUMPS, MAKITA, MANSFIELD, A.Y.  MCDONALD, McDONNELL & MILLER, MERRILL, MICHIGAN HANGER, MID-AMERICA, MIFAB, MILL-ROSE, MILWAUKEE TOOL, MOEN FAUCET, MR. STEAM, MUELLER, MYERS, NAUTILUS, NDS, NEENAH, NIBCO,

SANIFLO - A Group SFA Company
Saniflo Home

         8. SANIVITE Gray Water Pumping Systems

SANIVITE

Handles hot water
Fits in cupboard
Ideal for dishwasher

The Sanivite is a gray water pump intended for utility room sinks, kitchens or laundry rooms. It is designed to handle very hot temperatures from waste water from dishwashers or washing machines (which must drain into a laundry tub first). It fits neatly inside a kitchen cabinet.
 

Free Shipping on all Saniflo Pumps!
White: $275.00   

To Ordering Page

Installation Instructions

Technical Data & Drawings

Product Details

Pump:

SANIVITE Gray Water Pumping Systems

 

 

Colors:

White

Shipping & Handling

Free shipping in the 48 contiguous states  *Indiana residents add sales tax

Specifiactions Dimensions: Including Pump Only H11" x W15" x D7" H28cm x W38cm x D18cm

Motor: Induction Motor (no carbon brushes or gears), tested over 50,000 cycles. 3600 rpm.

Electrical supply: 110-115V; 60Hz; 5.4amps

Discharge: Horizontally to 150 ft (50m) Pumps vertically to 12 ft (3.5m)

Gravity Fall on Horizontal installations: 1/4" per ft

Discharge Pipe Diameter: 1"; 25mm

Construction Materials: Polypropylene, C.R.P., stainless steel, Neoprene Max. temp. 194°F; 90°C

Normal Running Time: 2–10 secs subject to installation pipe run

Water: Volume 11.97 gal/m; 44 l/m

Designed to function with: Hand-basin, Shower, Bathtub.
 

The Sanivite is a gray water pump and is ideally suitable for use in a basement apartment. It will pump waste water away from a variety of sources, such as a kitchen sink, laundry sink, clothes washer (indirect via a laundry tub only), dishwasher, bar sink, etc., etc.

The inside of the Sanivite comprises of a pressure chamber, which starts and stops the unit and the motor, which drives the pump.

When water is entering the Sanivite a microswitch in the pressure chamber is activated, which in turn starts the motor. The motor is sealed for life in an oil filled enclosure. A spindle drives the impeller, the moving parts therefore are kept to an absolute minimum. Water enters the chamber and are pumped away into the sanitary sewer. The pump operates at 10 PSI and pumps the waste upwards to 12 feet and/or 150 feet horizontally. Once the water is discharged and the water level in the container goes down, the microswitch deactivates the unit until water enters the unit again. A normal operating cycle for Sanivite can be as short as 2-10 seconds depending upon the discharge pipe run configuration, power consumption is therefore minimal.

In addition to sinks, Sanivite will also accept and discharge the waste water from a variety of other sanitary fixtures, such as; a hand basin, a shower, a bath, a urinal and possibly a whirlpool. When adding a shower or bathtub, a base will have to be constructed, made out of 2" x 6" on edge, to allow for the installation of a P-trap and some gravity flow towards the pump unit, as it does not suck in water.

The waste water from other sanitary fixtures is discharged into Sanivite via two 1½-inch inlets, on either side of the housing. Either one or both inlets can be used as required. The discharge elbow on top of the Sanivite can be turned either to the left or to the right, depending on the discharge installation. The Sanivite may be vented, there is a 1½-inch connection on the top of the unit. The discharge pipe size may be made from 1-inch material.

The Sanivite is small enough to fit comfortably inside a kitchen cabinet or vanity or inside the overhang of a whirlpool. Electrical supply to the Sanivite is 120V, 15 Amp. The system should be connected to a Ground Fault Circuit Interrupter circuit.

 

LEGAL DISCLAIMER

The Plumbingmall attempts to provide information which is correct and up-to-date.  However, errors do occur and therefore we do not  make any guarantees or warranties that the information on this web site is free of errors.  Therefore, when reviewing and/or using the plumbingmall web site, you must accept that the information on this web site is without any express or implied warranty that it is correct and that you accept the risk that the information on this web site may be incomplete or inaccurate. Additionally, the plumbingmall shall not have any liability for any direct or indirect damages, any direct or indirect incidental damages, or any direct or indirect consequential damages regarding any of the information on this web site.© Copyright 1995 - 2007 The Plumbing mall.com. All rights reserved.
Reproduction in whole or in part in any form or medium without the expressed
written permission of The Plumbing Mall is prohibited. All trademarks are the
property of the respective companies.