Saniflo Home

SANIFLO'S SANICUBIC 1

Sanicubic 1 Macerator Pumps for multiples appliances and fixtures

•Heavy Duty commercial and residential use
•Five different inlets
•Handles up to 50 gpm
•Free Shipping

What's Included

The Sanicubic 1 macerator pump system allows you to connect several appliances and fixtures.

With its powerful 1500W motor and multiple inlets, the Sanicubic 1will remove waste from multiple toilets, as well as gray wastewater from the kitchen, bathroom and laundry.

Sanicubic 1 Installation Sheet Warranty Information Free Shipping!

Our Price:

The Sanicubic 1 is a pre-assembled heavy-duty grinder pump that meets the demanding needs of commercial and residential sewage applications. This single grinder system is made of stainless steel that liquefies solids into small particles prior to being passed through the 1-1/2” discharge. It is designed to handle multiple waste fixtures for applications such as residential single or group homes, commercial buildings, schools and many more.
This new system consists of one 1-horsepower motor housed inside a compact but highly durable plastic enclosure. Fast-rotating cutting blades to reduce solids in the wastewater stream from toilets, tubs and showers, sinks, washing machines, dishwashers, etc.

The wastewater from other sanitary fixtures is discharged into the Sanicubic 1 via 1½-inch or 4” inlets, on either side of the housing and on the top of the enclosure. The internal discharge pipes come equipped with check valves that prevent back flow into the unit. Isolating valves (not supplied) must be installed on waste inlets and on the discharge pipe to ensure that any service/maintenance may be carried out safely.
This unit has been designed with a 1-1/2” vent connection on the top of the enclosure. All plumbing codes require connection to a vent system. Please note that the vent system should be a two-way air vent. The use of mechanical vents, air admittance valves or similar devices are not permitted as these are considered one-way air vent systems.

Sanicubic 1 Specifications

Motor RPM	2800
Electrical Supply	220 - 240
Amperage	1500
Discharge Pipe Diameter	1 ½
Vertical Discharge	36 ft.
Horizontal Discharge	360 ft.
Working Temperature	30-70°F
Maximum Temperature	95°F
Dimensions (measured from floor level)	23¾ x 19¼ x 16½